TOUCHSatin Interior Detailer

A complex polymer system leaving a satin, factory-fresh finish on interior plastics and metal. Safe on plastics, leather, Alcantara and glass.

1. Preparation: Remove loose debris with a soft brush or vacuum.
2. Apply: Mist the product onto a clean microfibre towel (avoid direct spraying on electronic screens).
3. Wipe: Work the surface gently until contamination is removed.
4. Buff: Turn the towel to a dry side and buff to a uniform finish.

Step 8 of 11, in the part of the wash we call “drying and finishing”. It goes on after ARMOUR and before PURE.

The inside is done once the outside is finished, so there is no chance of carrying wet grit back in through the door on your sleeve.

See it in place in the full wash, with the measure and the dwell for every stage either side of it.

• <5% Anionic Surfactants
• <5% Amphoteric Surfactants
• Preservatives, Fragrance, Colourants.

Always test on an inconspicuous area on first use. Full safety information is printed on the label.